LEARN TO PLAY MUSICENHANCE YOUR PLAYING SKILLSEXPAND YOUR MUSICALITYBE CERTIFIEDMAKE USE OF YOUR QUARANTINE TIME TO BE PRODUCTIVELEARN A NEW HOBBYFOR YOUR KIDS, YOURSELF, AND THE WHOLE FAMILY"No matter what situation, our greatest gift in life; is ou..
Check out Fidel de Jesus trying out the Revv G2, G3, and G4 pedals. Recorded a full mix as well as isolated clips.Which has the best sound for you? Let us know in the comments section below!Signal chain:Kiesel O7X - Revv (G2/G3/G4) - Amplifire (6L6 P..
For every musician out there, being in-tune is one of the most important prerequisites to a performance. It hardly matters whether you’ve got the best rig if your instruments are out of tune. Luckily, for the bassists and guitarists out there, TC Ele..
Pedals are the lifeblood of any guitarist in a band. Whether your genre is blues, metal or a variant of jazz, in order to get that perfect tone texture, you’re going need to use a pedal. While this holds true, pedals can be rather expensive. Aside fr..
Reverb is a necessary effect in any guitarist’s arsenal, allowing you to effectively control the ambience of any song. As far as reverb pedals go, none have amassed the reputation that TC Electronic’s Hall of Fame Reverb has, and with good reason...
CIOKS Schizophrenic link is a small sized power supply for effect pedals with a versatility yet not seen in such a small unit. It has 6 isolated outlets and offers voltages 9, 12 and 18V with no need of special Flex cables. The first two outlets can be set to 18V, where the last t..
This adapter allows you to link two CIOKS Link power supplies, where two or more power supplies are powered with a single mains power cord. You can use this adapter and feature with all four power supplies from the Link range (Big John Link, Schizophrenic Link, AC Rider Link, and Adam Link) as well..
TYPE 4 – CENTRE POSITIVE 5,5/2,5MM PLUG
Type 4 Flex cables are green and fitted with a centre positive 5,5/2,5mm DC plug. This Flex cable type is nowdays mainly used to power all Eventide Factor and H9 pedals and is widely used for many AC pedals. This Flex cable is available with angled (L-shaped) ..
TYPE 2 – CENTRE POSITIVE 5,5/2,1MM PLUG
Type 2 Flex cables are red and fitted with a centre positive 5,5/2,1mm DC plug. This standard is less popular but also widely used in older or positive ground pedals as for example the ’69 Pedal, Soulbender or Octafuzz from Fulltone or Voodoo Lab’s Proctavia. ..
SPLIT FLEX – TYPE 1
Split Flex gives you the possibility for connecting two pedals to the power supply using one outlet only. Two cables in lengths 30 and 50cm are connected to the plug on the power supply side. On the other end they are terminated with 5,5/2,1mm centre negative angled DC plugs whic..
3-WAY DAISY CHAIN FLEX – TYPE 1
This Flex cable makes it possible to power three pedals using only one outlet of the power supply. You need to make sure that the three pedals can all be powered by the same voltage and that they all use the most common 5,5/2,1mm centre negative DC plug, the BOSS sta..
EXTENSION FLEX – BLACK
Extension Flex is a 50cm cable with two RCA plugs, a male one in one end and a female at the other. You can use this Flex cable to make any other Flex cable 50cm longer.
1001 CIOKS extension Flex – 50cm / 20″ (black)
CIOKS FLEX CABLES - ..
DC8 is a professional medium sized multi-output power supply for effect pedals. It has 8 regulated and well-filtered DC outlets configured in 6 isolated sections. With a total of 1.000mA it’s a perfect solution for small or medium size rigs with pedals only using a DC power source. Its two power..
DC7 is a professional multi-output power supply for effect pedals. It has 7 regulated and well-filtered DC outlets configured in 7 isolated sections. It can be expanded by connecting the DC4. It is also compatible with CIOKS GRIP to conveniently mount it in a pedaltrain pedalboard.
DC5 link is a professional, small and very flat power supply for effect pedals with 5 isolated outlets. Being only 31mm high it fits under the
flat Pedaltrain nano, mini, new nano+ and all metro boards. It offers voltages 9, 12 or 18V and has a total output current of 900mA. The top two sw..
DC10 is a professional multi-output power supply for effect pedals. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with pedals only using a DC power source. Its three powerful sections with 400m..
Adam link is a small and very flat power supply for effect pedals with 4 isolated outlets. Being only 31mm high it fits under the flat Pedaltrain nano, mini, new nano+ and all metro boards. It offers voltages 9 or 12V and a total output current of 700mA. The top two fixed 9V outlets will p..